Spray Gun Application
Easy As One, Two, Three!
*Design R Products ® has designed a spray gun especially for
installing Design R Wall ®. (An air compressor with a minimum 2-horse power/125psi is necessary to operate the gun.) Spraying is highly recommended for larger areas and increases coverage area
substantially. Contact us for more information.
1. Essential! Start with a dry primed surface (2 solid coats of BIN
Primer/Sealer). Fill spray gun with thoroughly mixed and soaked Design R Wall®.
2. Begin spraying in a uniform pattern.
3. Refill gun with Design R Wall® as needed and continue spraying until surface is completely covered.
Before you begin, please
read over the following:
• Estimating Guide
• Tools
• Installation
• Spray Gun Application
•
FAQ
|
